Introduction

Since its humble beginnings in the 1970s, disc golf (aka Frisbee golf) has evolved into a juggernaut, with an estimated four million people playing worldwide. Whether you're a regular at the local course or just getting started, having your own backyard disc golf basket means hours of practice without fighting the crowds.

Sure, you can buy a backyard basket, but where's the fun in that? I built one, and you can, too.

To keep costs down, I used an old tire (free), a bike wheel ($10) and umbrella stand ($20) from Facebook Marketplace, and some plywood and sheet metal I found on the curb. Rounding out the purchases are PVC pipe ($10), which is sturdy but cheaper than metal conduit, and various fittings and hardware (approximately $40, but this will vary depending on what you have stashed in your garage).

Finally, let's talk about the chain. You need about 40 feet for this project. While there is no official regulation size for the links, many devotees on the web recommend 2/0 or 3/16-in. galvanized steel chain. That would have cost more than $100! Because I am not a professional, I chose a smaller gauge zinc-plated chain to keep the chain cost at less than $40.

Tools Required

Materials Required

  • 1-1/2-in PVC male adapter
  • 1-1/2-in PVC pipe (5 feet long)
  • 1-in sheet metal screws with neoprene washers
  • 2-in. x 1-1/2-in PVC reducing bushing
  • 2x4 scrap wood
  • 3/8-in. x 6-in lag screw and washer
  • 40 feet of exterior-grade chain
  • Aluminum sheeting
  • Bike wheel
  • Eye protection
  • Gloves
  • Outdoor-rated duct tape or stucco tape (optional)
  • Plastic tubing (optional)
  • Plywood the size of tire
  • S-hooks or quick links
  • Shower drain (2-piece)
  • Umbrella base
  • Used tire
  • Wood screws
  • Zip ties